The VooPoo Drag X Vape Kit is a powerful, user-friendly sub-ohm vape device designed for both beginners and experienced vapers. It’s built around the advanced GENE.FAN 2.0 chipset, offering smart coil recognition, adjustable wattage, safety protections, and customizable vaping options.

The main components you’ll be working with are:

• A Drag X Plus mod (main body with display and buttons)

• A TPP pod tank

• A TPP mesh coil (usually 0.15Ω and 0.20Ω included)

• A USB-C charging cable

• A battery

• A User Manual
  
  

Below is a step-by-step guide to set up and use your VooPoo Drag X Vape Kit the right way.

1. Install the Battery

Before using the VooPoo Drag X Vape Kit, insert a compatible 18650 or 21700 battery into the mod.

• Remove the battery cap (usually at the bottom).

• Insert the battery with the positive (+) end facing the correct direction (as marked).

• Replace the cap securely.

Note: Always use high-amp batteries recommended for vaping and never carry loose batteries in pockets without caps.

2. Attach the Pod Tank

The TPP pod tank that comes with the VooPoo Drag X Vape Kit connects magnetically to the mod.

• Align the pod with the magnets on the top of the mod.

• Push gently until it clicks into place.
  You’ll know the pod is seated correctly when it feels snug and doesn’t wobble.

3. Prime and Install the Coil

Your kit includes two coils (usually TPP-DM1 0.15Ω and TPP-DM2 0.20Ω).

• Push the coil into the base of the pod until it’s fully seated.

• Prime the coil by adding a few drops of e-liquid directly onto the exposed cotton — this helps prevent dry hits.

• Fill the tank with your preferred e-liquid through the bottom fill port (usually silicone stoppered).

• Wait a few minutes after filling so the coil can fully absorb the juice.

Tip: High-VG e-liquids (usually 70% VG and up) work best with the coils included in the Drag X Vape Kit.

4. Turn On the Device

To power on the VooPoo Drag X Vape Kit:

• Press the fire button 5 times quickly.

• The display screen will light up with the current settings.
  
  

If nothing appears, make sure the battery is fully charged and inserted correctly.

5. Adjust Your Settings

The Vape Kit offers several ways to control how it vapes:

Smart Mode

• Automatically detects the coil you installed and selects a recommended wattage.

• Best for beginners or anyone who doesn’t want to fuss with wattage.
  
  

Variable Wattage Mode

• Lets you manually adjust the power (wattage) up to 100 W.

• Higher wattages produce more vapor but use more e-liquid and battery power.
  
  

RBA Mode

• Intended for advanced users who want to use rebuildable atomizers.

• Offers more control and stronger ramp-up performance.
  
  

Use the up/down buttons to set the wattage or switch modes. The display will show resistance, wattage, and battery level.

6. Vape Responsibly

Once everything is set:

• Hold the fire button while inhaling through the mouthpiece.

• Release the button when done.
  
  

If the vape tastes burnt, reduce the wattage or wait longer for the coil to absorb juice.

7. Charging and Maintenance

• Charge the device using the included USB-C cable.

• Never leave it charging unattended.

• Replace coils when flavor diminishes or vapor decreases.